Deep Scrub and Recoat
- Sweep floor with untreated dust mop.
- Apply concentrated neutral cleaner to floor
- Let solution dwell for 10 minutes.
- Machine Scrub with green or deep blue scrub pad.
- Remove solutions with auto scrubber or wet vacuum
- Rinse floor with cold water.
- Detail corners, edges, under displays and shelving.
- Recoat floor with 2 coats of floor finish.
Floor Stripping and Refinish
- Sweep floor with untreated dust mop.
- Apply stripping solution liberally to floor and allow to dwell up to 10 minutes.
- Agitate solution with propane or electric stripping equipment.
- Clean edges and corners with scraper and doodle bug edger.
- Pick up stripping solution with wet vacuum.
- Rinse floor with clean cold water with mop or auto scrubber.
- Recoat floor with 5 coats of floor finish.
Routine Resilient Floor Maintenance Procedures
- Sweep soil away from outside entrances.
- Clean and disinfect tile surfaces in bathrooms.
- Clean breakroom floors.
- Clean office area floors.
- Dust mop/vacuum/mop behind and all displays and under counters.
- Wipe down baseboards, detail edges/corners
- Clean outside and inside floor mats.
- Sweep floor with untreated dust mop and remove debris, gum and stickers.
- Auto-scrub/mop entire floor with neutral cleaner/ enhancer.
- Burnish floor with ultra high speed propane burnisher.